New improved model with quadruple nose piece having positive click stops based on balls, rotatable binocular head with hard coated prisms, co-axial focussing based on 4 stage gear reduction system, travelling on ball guides, locking device in coarse motion to avoid damage to valuable slides, built in co-axial mechanical stage for slide manipulation, built in light arrangement having 6v-20w halogen lamp and solid state variable light control system. Complete as above in plywood cabinet or thermocole packing with following optics.
pieces H 5x & WF 10x (pairs)
Objectives 5x, 10x, 45x (SL), 100x (SL) Oil immersion
a) Complete as above with 'A' Grade Indian Optics.
b) Complete as above with 'A' Grade Indian Optics & Imported 100x oil immersion.
c) Complete as above with all imported optics.

Same as model AW-10 but with twin bulb system. Packed in card board box. ( Powder Coated)

820 Spencer type) latest model, with one razor 120mm and honing stone. Feed range 150 micron in steps of one micron with automatic feed release device, complete in box with three object holders and raxine cover.

Virtical flask type, larg size very useful demonstration model with detailed key card
A. 2 Strokes
B. 4 Strokes

(Three side heating element) Standard double wall fabrication. Inner chamber made of richly anodized fabricated out of thick mild steel sheet duly finished in stoved enamel off - white paint or pastle mat finish colour combinations. The gap between the walls is filled with special grade grass wool for heat insulation. Inner chamber is ribbed for placing shelves at convenient levels. Provided with two or three removeable shelves. Special elegant door closing device has been provided.
Nichorome wire heating elements provided on three sides attain quick and uniform heating in range of 50ºC to 250º ± 1ºC control led by capillary type thermostat.
L-shaped theremometer is built in type. Control panel is provided with selector switch of high or low rates of power. Thermostat control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.