Round Bath can be used with Water or Oil.
- Front Panel have a PID controller and Timer.
- Temperature Range upto 100 to 300 degree celcius

Also available, Immersion series of Round Baths for Water/Oil.
- Control is by Thermostat or Digital controllers.
- With Circular heater, so that flask does not touch the element.

Available for flasks capacity: 1 litre, 3 litre, 5 litre and 10 litre

Standard double wall cosntruction, inner being of stainless steel outer of m.s. duly stoving paint finish and gap filled for temp. insulation with glass wool. The cover with 75 mm (3") holes with concentric rings. Temp. range 5ºC above ambient to 95ºC controlled by a thermostat. Heating is attained by an immersion type element with accuracy of ± 1ºC.
Supplied complete with plug & cord. Panel provided with pilot lamps, thermostat control knob etc.
a) 5 holes
b) 6 holes
c) 12 holes

Body made out of thick stainless steel. Top made out of chrome plated sheet. Concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220V Ac 50 Hz single phase.
a) 6 holes
b) 12 holes
OPTIONALS (Extra Cost)
i) Digital Temp. Indicator
ii) Digital Temp. Indicator cum controller

Construction as per model AM 108 but with glass windows on both opposite sides for observation. Temp. controlled by mercury contract thermometer with a sensitivity of 0.2ºC. Suitable for precision laboratory activities requiring cosntant temp. with high degree of accuracy. Complete with stirrer with speed control regulator workable on 220V AC 50 Hz single phase.

Body specifications as per standard double wall water baths but provided with cups & sleeves for glass tubes.
a) 4 caps & 6 sleeves
b) 6 caps & 8 sleeves
c) 12 caps & 14 sleeves

Suitable to spread wax section ribbons after microtomy to get wrinkle free specimen for staining. Double wall round construction. Inner chamber back anodized aluminium and outer made out of mild steel sheet duly finished in stoving white enamel paint. Inner chamber is single stainless piece to avoid chances of any leakage with enough wide rim for drying wet slides.
Temp. range 5ºC above ambient to 70ºC ± 2ºC. immersion type heating elements attain the controlled temperature regulated by a capillary thermostat. Panel provided with thermo regulator kbob, pilot lamp and is supplied with cord & plug. Equipment workable on 220 V AC 50 Hz single phase.

Double wall construction. Inner chamber made of highly polished stainless steel or copper sheet and outer made of mild steel duly finished in sloving enamel. Temperature range 50ºC to 250ºC ± 2ºC is controlled by a thermostat.
The oil bath is suitable for a wide range of applications like oxidation stability test on oils, other tests in which high temp. control is requried.
Supplied complete with stirrer, diffuser shelves, cover etc. panel provided with on-off switch, pilot lamps thermostatic control knob etc.

Useful for dual purpose. It is a combination of serological and routine rectangular water bath with holes and concentric rings.
Standard double wall construction. Inner chamber made out of highly polished stainless steel sheet and exterior made out of thick milk steel duly finished in stoving enamel paint. The gap between the two walls is filled with special glass wool for temp. insulation.
Immersion heaters are provided for heating to attain temp. range from 5ºC above ambient to 90ºC ± 1ºC and is controlled by capillary type thermostat, controlled by thermostat control knob on the panel. Supplied complete with plug & cord. The equipment works on 220 V AC 50 Hz single phase.
Equipment has been provided with two covers, one of a pyramidal shape and the other with 75 mm dia. holes with concentric rings. The chamber is provided with a drain cock to easily drain out the water whenever required.

a) Standard double walled construction. Inner chamber made out of thick highly polished stainless steel sheet. Temperature range 5ºC to 90ºC and controlled by a sensitive Mercury contact thermometer with an accuracy of ± 0.2ºC. Fitted with a stirrer and speed regulator.
b) As above but refrigerated bath fitted with a FHP pump for circulating the cold liquid to the external equipment.
a) Chamber size : 500 x 250 x 250 mms.
b) Digital Temp. Controller cum indicator

Standard construction, Inner chamber made out of stainless steel sheet with digital temp. controller cum indicator. Temperature control range from – 20ºC to ± 20ºC.
Chamber Size : 450 x 300 x 300 mms.